Multifunction Busbar Processing
Machine BM303-S-3
The multifunction busbar processing machine is
the patented product developed by our company. Comparing with the traditional
busbar processing machine, this product has the following advantages and
features:
The punching and shearing units adopt round integral structure,
with novel and unique design rendering reasonable force bearing, and thus
effectively guarantees the long-term use without deformation;
The bending
unit uses integral structure and CNC angle control mode, allowing easy operation
and high accuracy;
This machine adopts the design approach of double-layer
work bench, truly realizing the simultaneous working of three stations without
mutual interference;
The machine is provided with an automatic oil charge and
discharge system, easy to operate, with the hydraulic oil charged into the oil
tank via a filter so as to protect the entire hydraulic system from
contamination;
This machine is provided with stainless steel oil tank to
protect the hydraulic oil from corrosive deterioration, and extend the service
life of hydraulic oil and the seals;
Swappable dies offering extreme
convenience;
PLC control that is stable and reliable.
Punching unit: Fast
swappable dies without the assistance of tools can complete processes of
punching round, oblong, square and double holes, embossing, molding, shearing
copper bars, etc..
(Punching die sample) (Embossing die sample)
Shearing
die: The adoption of punching and shearing approach guarantees the sectional
perpendicularity, producing deformation-free workpiece with polished and
nice-looking end face.
Simple shearing is applied to get rid of material
waste, thus saving the raw materials.
(Punching and shearing simple
shearing)
Bending unit:
Level and vertical bending, elbow bending, cable
plug molding, copper bar bending, etc. can be achieved by altering the dies. The
unit is of simple dies easy to replace.
(Die of vertical bending
sample)
(Die of double-head Level bending sample)
(Cable lug molding
die)
Configuration of the machine:
Work Bench Dimension (mm) | Machine Weigh t (kg) | Number of Motors | Total Motor Power (kW) | Working Voltage (V) | Number of Hydraulic Units (MPa) | Control Mode |
Layer I: 1500×1200 | 1460 | 3+1 | 11.37 | 380 | 3×31.5 | PLC+ CNC angle bending |
Layer II: 840×370 |
Main technical parameters
Name | Material | Machining W* H(mm) | Max Punched Hole | Max Output Force (kN) |
Punching unit | Copper/Aluminum | H:15 | Ф32(H≤10mm) Ф25(H≤15mm) | 350 |
Shearing unit | Copper/Aluminum | Punching and shearing: 12×160 Simple shearing: 15×160 | 350 | |
Bending unit | Copper/Aluminum | Level bending: 15×160 Vertical bending: 12×120 | 350 |