Multifunction Busbar Processing Machine BM303-S-3
The
multifunction busbar processing machine is the patented product developed by our
company. Comparing with the traditional busbar processing machine, this product
has the following advantages and features:
The punching and shearing units
adopt round integral structure, with novel and unique design rendering
reasonable force bearing, and thus effectively guarantees the long-term use
without deformation;
The bending unit uses integral structure and CNC angle
control mode, allowing easy operation and high accuracy;
This machine adopts
the design approach of double-layer work bench, truly realizing the simultaneous
working of three stations without mutual interference;
The machine is
provided with an automatic oil charge and discharge system, easy to operate,
with the hydraulic oil charged into the oil tank via a filter so as to protect
the entire hydraulic system from contamination;
This machine is provided with
stainless steel oil tank to protect the hydraulic oil from corrosive
deterioration, and extend the service life of hydraulic oil and the
seals;
Swappable dies offering extreme convenience;
PLC control that is
stable and reliable.
Punching unit: Fast swappable dies without the
assistance of tools can complete processes of punching round, oblong, square and
double holes, embossing, molding, shearing copper bars, etc..
(Punching die
sample) (Embossing die sample)
Shearing die: The adoption of punching and
shearing approach guarantees the sectional perpendicularity, producing
deformation-free workpiece with polished and nice-looking end face.
Simple
shearing is applied to get rid of material waste, thus saving the raw
materials.
(Punching and shearing simple shearing)
Bending unit:
Level
and vertical bending, elbow bending, cable plug molding, copper bar bending,
etc. can be achieved by altering the dies. The unit is of simple dies easy to
replace.
(Die of vertical bending sample)
(Die of double-head Level
bending sample)
(Cable lug molding die)
Configuration of the
machine:
Work Bench Dimension | Machine Weight | Number | Total Motor | Working | Number of Hydraulic | Control Mode |
Layer I: 1500×1200 | 1280 | 3+1 | 11.37 | 380 | 3×31.5 | PLC+ CNC |
Layer II: 840×370 |
Main technical parameters
Name | Material | Machining W* H (mm) | Max Punched Hole | Max Output Force (kN) |
Punching unit | Copper/Aluminum | 厚度15 |
Ф32(H≤10mm) Ф25(H≤15mm) | 350 |
Shearing unit | Copper/Aluminum | Punching and shearing: 12×160 Simple shearing: 15×160 | 350 | |
Bending unit | Copper/Aluminum | Level bending: 15×160 Vertical bending: 12×120 | 350 |