Multifunction Busbar Processing Machine
BM603-S-3(16×260)
The multifunction busbar processing machine is the patented product developed by our company.
Comparing with the traditional busbar processing machine, this product has the following advantages
and features:
The punching and shearing units adopt column structure, with novel and unique design rendering
reasonable force bearing, and thus effectively guarantee the long-term use without deformation;
The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;
Comparing with common busbar processing machine, this machine is of stronger capability in busbar
processing, which is able to perform the punching, shearing, bending, etc. of busbar with special width and height;
This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous
working of three stations without mutual interference;
The machine is provided with an automatic oil charge and discharge system, easy to operate, with the
hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system
from contamination;
This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive
deterioration, and extend the service life of hydraulic oil and the seals;Swappable dies offering
extreme convenience;
PLC control that is stable and reliable.
Punching unit: Fast swappable dies without the assistance of tools can complete processes of
punching round, oblong, square and double holes, embossing, molding, shearing copper bars, etc..
(Punching die sample) (Embossing die sample)
Shearing die: The adoption of punching and shearing approach guarantees the sectional perpendicularity,
producing deformation-free workpiece with polished and nice-looking end face.
Simple shearing is applied to get rid of material waste, thus saving the raw materials.
(Punching and shearing simple shearing)
Bending unit:
Level and vertical bending, elbow bending, cable plug molding, copper bar bending, etc. can be
achieved by altering the dies. The unit is of simple dies easy to replace.
(Die of vertical bending sample)
(Die of double-head level bending sample)
(Cable lug molding die)
Configuration of the machine:
Work Bench Dimension (mm) | Machine Weight (kg) | Number of Motors | Total Motor Power (kW) | Working Voltage (V) | Number of Hydraulic Units (MPa) | Control Mode |
Layer I: 1500×1500 | 1800 | 3+1 | 11.37 | 380 | 3×31.5 | PLC+ CNC angle bending |
Layer II: 840×370 |
Main technical parameters
Name | Material | Machining W* H (mm) | Max Punched Hole | Max Output Force (kN) |
Punching unit | Copper/Aluminum | 16×260 | Ф32 | 600 |
Shearing unit | Copper/Aluminum | Punching and shearing: 16×260 Simple shearing: 16×260 | 600 | |
Bending unit | Copper/Aluminum | Horizontal bending: 16×260 Vertical bending: 12×120 | 350 |