Multifunction Busbar Processing Machine BM303-J-1
The
multifunction busbar processing machine is the patented product developed by our
company. Comparing with the traditional busbar processing machine, this product
has the following advantages and features:
The punching and shearing units
adopt round integral structure, with novel and unique design rendering
reasonable force bearing, and thus effectively guarantees the long-term use
without deformation;
The bending unit uses integral structure and angle limit
control mode, allowing easy operation and high accuracy;
This machine adopts
the design approach of double-layer work bench;
The machine is provided with
an automatic oil charge and discharge system, easy to operate, with the
hydraulic oil charged into the oil tank via a filter so as to protect the entire
hydraulic system from contamination;
This machine is provided with stainless
steel oil tank to protect the hydraulic oil from corrosive deterioration, and
extend the service life of hydraulic oil and the seals;
Swappable dies
offering extreme convenience;
PLC control that is stable and
reliable.
Punching unit: Fast swappable dies without the assistance of tools
can complete processes of punching round, oblong, square and double holes,
embossing, molding, shearing copper bars, etc..
(Punching die sample)
(Embossing die sample)
Shearing die: The adoption of punching and shearing
approach guarantees the sectional perpendicularity, producing deformation-free
workpiece with polished and nice-looking end face.
Simple shearing is applied
to get rid of material waste, thus saving the raw materials.
(Punching and
shearing simple shearing)
Bending unit:
Level and vertical bending, elbow
bending, cable plug molding, copper bar bending, etc. can be achieved by
altering the dies. The unit is of simple dies easy to replace.
(Die of
vertical bending sample)
(Die of double-head horizontal bending
sample)
(Cable lug molding die)
Configuration of the machine:
Work Bench Dimension | Machine Weight | Number | Total Motor | Working | Number of | Control Mode |
Layer I: 1200×1000 | 1080 | 1+1 | 4.37 | 380 | 1×31.5 | PLC+ limit |
Layer II: 840×370 |
Main technical parameters
Name | Material | Machining W* H (mm) | Max Punched Hole | Max Output Force (kN) |
Punching unit | Copper/Aluminum | H 15 |
Ф32(H≤10mm) Ф25(H≤15mm) | 350 |
Shearing unit | Copper/Aluminum | Punching and shearing: 12×160 Simple shearing: 15×160 | 350 | |
Bending unit | Copper/Aluminum | Level bending: 15×160 Vertical bending: 12×120 | 350 |